page . 1 august 3,2012-rev.00 ER2002ST features ? plastic package has underwriters laboratory flammability classification 94v-o. flame retardant epoxy molding compound. ? exceeds environmental standards of mil-s-19500/228 ? low power loss, high efficiency. ? low forward voltage, high current capability ? high surge capacity. ? super fast recovery times, high voltage. ? epitaxial chip construction. ? lead free in comply with eu rohs 2002/95/ec directives isolation superfast recovery rectifier notes: 1. reverse recovery test conditions: i f =.5a, i r =1a, irr=.25a. 2. semi-infinite heatsink. voltage 200 volts current 20 amperes mechanical data ? case: to-3ps molded plastic ? terminals: lead solderable per mil-std-750, method 2026 ? polarity: as marked. ? standard packaging: any ? weight: 0.1932 ounces, 5.48 grams. maximum rating and electrical characteristicss ratings at 25c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% parameter symbol value units maximum recurrent peak reverse voltage v rrm 200 v maximum rms voltage v rms 140 v maximum dc blocking voltage v dc 200 v maximum average forward current per device per diode i f(av) 20 10 a peak forward surge current : 8.3ms single half sine-wave superimposed on rated load (jedec method) per diode i fsm 150 a maximum forward voltage at 10a per diode v f 1v maximum dc reverse current at rated dc blocking voltage per diode i r 10 a maximum reverse recovery time (note 1) t rr 25 ns typical thermal resistance (note 2) per diode r jc 2 o c / w operating junction and storage temperature range t j ,t stg -55 to +150 o c 0 . 5 1 6 ( 1 3 . 2 0 ) 0 . 5 0 4 ( 1 2 . 8 0 ) 0.615(15.60)max. 0.520(13.20) 0.504(12.80) 0.402(10.20) 0.385(9.80) 0.732(18.58) 0.715(18.18) 0.071(1.80) 0.055(1.40) 0.095(2.40) 0.078(2.00) 0.050(1.25) 0.037(0.95) 0.223(5.65) 0.206(5.25) 0.223(5.65) 0.206(5.25) 0.118(3.0) min. 0.599(15.20) 0.582(14.80) 0.577(14.65) 0.565(14.35) 0.166(4.20) 0.149(3.80) 0.776(19.70) 0.759(19.30) 0.579(14.70) 0.563(14.30) 0.185(4.70) 0.169(4.30) 0.103(2.60) 0.090(2.30) 0.025(0.62) 0.014(0.38)
page . 2 august 3,2012-rev.00 ER2002ST 0 2 4 6 8 10 12 0 2 5 5 0 7 5 100 125 150 t c , case temperature (c) i f , fo rw ard cur rent ( a) 0.001 0.01 0.1 1 10 100 20 40 60 80 100 i r , reve rse cu rren t (u a) t j = 25c t j = 75c t j = 125c t j = 150c fig.3 typical reverse characteristics fig.4 typical forward characteristics fig.1 forward current derating curve fig.2 typical junction capacitance 1 10 100 1000 0.1 1 10 100 v r , reverse bias voltage (v) 0.01 0.1 1 10 100 0.2 0.4 0.6 0.8 1 1.2 v f , forward voltage (v) i f , fo rw ard cur rent ( a) t j = 150c t j = 125c t j = 25c t j = 75c c j , junc tion capacitanc e (pf) percent of rated peak reverse voltage (%)
page . 3 august 3,2012-rev.00 ER2002ST part no_packing code_version ER2002ST_t0_00001 ER2002ST_t0_10001 for example : rb500v-40 _ r2 _ 00001 part no. serial number version code means hf packing size code means 13" packing type means t/r packing code xx version code xxxxx packing type 1 st code packing size code 2 nd code hf or rohs 1 st code 2 nd ~5 th code tape and ammunition box (t/b) a n/a 0 hf 0 serial number tape and reel (t/r) r 7" 1 rohs 1 serial number bulk packing (b/p) b 13" 2 tube packing (t/p) t 26mm x tape and reel (right oriented) (trr) s 52mm y tape and reel (left oriented) (trl) l panasert t/b cathode up (pbcu) u forming f panasert t/b cathode down (pbcd) d
page . 4 august 3,2012-rev.00 ER2002ST disclaimer ? reproducing and modifying information of the document is prohibited without permission from panjit international inc.. ? panjit international inc. reserves the rights to make changes of the content herein the document anytime without notification. please refer to our website for the latest document. panjit international inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ? panjit international inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ? applications shown on the herein document are examples of standard use and operation. customers are responsible in comprehending the suitable use in particular applications. panjit international inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ? the products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify panjit international inc. for any damages resulting from such improper use or sale. ?
|
